heobanhki
New Member
Tình hình là mình có 1 cây bị no gsm đang nhứt đầu.
mọi người tham khảo và cho ý kiến cái này nha.
đây là link của chủ thớt bên xda . ai muốn tv thì lấy google ra dịch nha.
http://forum.xda-developers.com/showthread.php?t=610218
cái này cho dễ down gồm
bin và file dll:
http://www.mediafire.com/?noyztkntxmn
hiên tại mình chưa làm được vì cây herm 100 của mình kg nhận cáp
đây là nguyên văn, mình copy wa cho mấy bro dễ nhìn kg cần wa bên đó.
post by nasirahmed, member xda-developers.com
Step By Step: Unbrick Your Hermes
This tutorial is for who have problem No GSM, device hangs on startup or black screen after startup animation. Just follow the procedure;
1. Download Visual Studio 2005 and Microsoft Windows CE 6.0 Embedded.
2. Click setup.exe and choose to install Visual Studio 2005 Professinal.
3. Now install Microsoft Winows Embedded CE 6.0
4. Disable USB connection in Microsoft Active Sync.
5. Open Visual Studio 2005, first time it will ask for default environment, select Visual C++.
6. Select File > New > Project
7. Select Platform Builder for CE 6.0, click OK.
8. Design Wizard will come up. Click Next
9. Select Device Emulator: ARMV4I, Click Next.
10. Select Custome Device, click Next.
11. Now Click next, next , next .... , leave all the boxes blank and finish the wizard.
12. Click Build > Copy files to release Directory
13. Again Click Build > Make Run-Time Image
14. Click Build > Open Release Directory in Build Window
now notice the path (its like C:\WINCE600\OSDEsigns\OSDesign1\OSDesign1\ReDir\De viceEmulator_ARMV4I_Debug) and open the folder manually from Windows Explorer.
15. Copy nk.bin , ril.dll , rilgsm.dll , serial_cmd.dll , stk_service.dll to that folder (see attachment for the dll's and bin)
16. Now go to Target > Connectivity Options and set like below
Download=Emulator (set to 256MB)
Transport=Usb
Debug=None
17. Now open your phone in KITL mode (COM MANAGER + POWER) and attach to PC USB.
18. Click Target > Attach Device
Process will start, wait around 2-3 min and you will see your device run up (do calibration if need but don't remove USB cable)
19. I tell you again don't remove usb cable at this stage, otherwise your device will hang up and you have to do the whole process again.
20. Now copy SSPL_HERM.exe in a MMC and insert that to device, go to File Explorer and execute that. Device will go to tri-color boot screen.
21. Now Flash RUU_Radinly_1.27.00.00.exe, it will take some minutes so be patient.
Your phone is unbricked.
tham khảo thêm cai này
http://forum.xda-developers.com/showthread.php?p=1162054
mọi người tham khảo và cho ý kiến cái này nha.
đây là link của chủ thớt bên xda . ai muốn tv thì lấy google ra dịch nha.
http://forum.xda-developers.com/showthread.php?t=610218
cái này cho dễ down gồm
bin và file dll:
http://www.mediafire.com/?noyztkntxmn
hiên tại mình chưa làm được vì cây herm 100 của mình kg nhận cáp
đây là nguyên văn, mình copy wa cho mấy bro dễ nhìn kg cần wa bên đó.
post by nasirahmed, member xda-developers.com
Step By Step: Unbrick Your Hermes
This tutorial is for who have problem No GSM, device hangs on startup or black screen after startup animation. Just follow the procedure;
1. Download Visual Studio 2005 and Microsoft Windows CE 6.0 Embedded.
2. Click setup.exe and choose to install Visual Studio 2005 Professinal.
3. Now install Microsoft Winows Embedded CE 6.0
4. Disable USB connection in Microsoft Active Sync.
5. Open Visual Studio 2005, first time it will ask for default environment, select Visual C++.
6. Select File > New > Project
7. Select Platform Builder for CE 6.0, click OK.
8. Design Wizard will come up. Click Next
9. Select Device Emulator: ARMV4I, Click Next.
10. Select Custome Device, click Next.
11. Now Click next, next , next .... , leave all the boxes blank and finish the wizard.
12. Click Build > Copy files to release Directory
13. Again Click Build > Make Run-Time Image
14. Click Build > Open Release Directory in Build Window
now notice the path (its like C:\WINCE600\OSDEsigns\OSDesign1\OSDesign1\ReDir\De viceEmulator_ARMV4I_Debug) and open the folder manually from Windows Explorer.
15. Copy nk.bin , ril.dll , rilgsm.dll , serial_cmd.dll , stk_service.dll to that folder (see attachment for the dll's and bin)
16. Now go to Target > Connectivity Options and set like below
Download=Emulator (set to 256MB)
Transport=Usb
Debug=None
17. Now open your phone in KITL mode (COM MANAGER + POWER) and attach to PC USB.
18. Click Target > Attach Device
Process will start, wait around 2-3 min and you will see your device run up (do calibration if need but don't remove USB cable)
19. I tell you again don't remove usb cable at this stage, otherwise your device will hang up and you have to do the whole process again.
20. Now copy SSPL_HERM.exe in a MMC and insert that to device, go to File Explorer and execute that. Device will go to tri-color boot screen.
21. Now Flash RUU_Radinly_1.27.00.00.exe, it will take some minutes so be patient.
Your phone is unbricked.
tham khảo thêm cai này
http://forum.xda-developers.com/showthread.php?p=1162054