• Hiện tại trang web đang trong quá hình chuyển đổi và tái cấu trúc lại chuyên mục nên có thể một vài chức năng chưa hoàn thiện, một số bài viết và chuyên mục sẽ thay đổi. Nếu sự thay đổi này làm bạn phiền lòng, mong bạn thông cảm. Chúng tôi luôn hoan nghênh mọi ý kiến đóng góp để chúng tôi hoàn thiện và phát triển. Cảm ơn

Phoenix Service Software 2011.38.003.46817 Cracked & Original [Update 27/09/2011]

TrieuNhan

New Member
Phoenix Service Software 2011.38.003.46817 Cracked & Original [Update 27/09/2011]

Mã:
Main component versions in the release:

• DK2 Driver Version 07.14.0.25
• Nokia Connectivity Cable USB Driver Version 7.1.45.0
• Flash Update Package 2011.34.000
• FLS-x Drivers Version 2.09.28
• FUSE Connection Manager v 2011.34.1

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.24.2.46258

New Products added
• RM-814, RM-815, RM-816, RM-781, RM-832, RM-833, RM-834, RM-761, RM-762, RM-799, RM-800, RM-764, RM-778

New features
• New version of FUSE connection Manager
• New version of Flash Update Package
• New version of Autotuning components
• New version of Product API
• New version of Connectivity Cable Driver
• Support for Windows 7 64 bit version (Note: FLS- 5 drivers do not support 64 bit OS, so phones using FLS-5 /USB_FBUS connection can not be serviced in 64 bit operating systems)
• New installation package with MS Visual C++ 2010

Error Corrections & changes
• Installation package now includes MS Visual C++ 2010 Redistributable Package. Installation will happen automatically when Phoenix_Service_Software_2011_38_3_46817.exe is run.
• The Envira Tool ( The ZIP package generator in Help / Troubleshooting – menu) updated
• Correction to DCT-4 autotuning with Willtek / Aeroflex test equipment detection. Testers were previously identified only if they reported themselves as Willtek. Testers are now identified also as Aeroflex.
• Improvements to Product Code changes with simultaneous flashing. Readiness to flash future “USB Only” – concept phones added. NOTE: Please see product specicic documents for information on the restrictions of product code changes with “flash” – option, especially in the cases of Software downgrade with Tucson system!
• Updated label printing components
• Support for long product codes
Please note:
• Microsoft DOT.NET version 2 Service Pack 2 is now the minimum requirement. Phoenix installation will check PC for the DOT.NET version and update it automatically when PC has online connection. Without online connection, old DOT.NET versions must be updated manually.
• New common data package location in use. Please see document SR1315 in KICS Information Center for further information.
• All Nokia Service Software Applications will use following location for product specific data:
- Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
- Windows 7: C:\Program Data\Nokia\Packages
• Please see articles SR1774 and 1786 for more information on the use of Nokia Data Package manager – tool, and article SR1854 for more information on the Nokia Service Application Manager Tool.
• During installation, Data Packages should be installed in these directories, if they install to any other location by default. target folder for local data packages can be changed in the installation wizard manually
• This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Packages
• Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC) should be turned off from Windows Control Panel settings.
• For more information concerning new options in “Firmware Update” – menu and their use, Please see documents SR1313 and SR1659 in KICS Information Center.
• Tucson operations combined with “flash” – option are now handled in the same way as “refurbishment”, which requires Mass Memory Content File to be available.
• Use of Flash option simultaneously with product code change for USB Only phones is restricted. It is recommended to flash phone separately with Firmware Update. Please refer to product specific instructions.
• Connection media to FLS-5 must be configured to be “USB_FBUS”, after FLS-4 support has been removed FBUS does not work anymore with FLS-5
• Install and use the latest available product specific data packages or flash bundles

Supported operating systems and user rights

• Windows XP Service Pack 1 or higher
• When installing Phoenix into Win XP you must have local admin rights.
• When using in Win XP, user must have power user rights.
• Windows 7 32 Bit version
• Windows 7 64 Bit version


0110201115123sa.jpg
0110201115245sa.jpg

0110201115318sa.jpg
0110201115431sa.jpg




CLICK DOWNLOAD
http://www.mirrorcreator.com/files/1IKSOSWI/
http://www.mirrorcreator.com/files/1IKSOSWI/
http://www.mirrorcreator.com/files/1IKSOSWI/
 
Up hình kiểu đó bó tay bạn ơi, không thấy rõ chữ gì cả.
e khắc phục đc rồi, do down FW bằng navifirm qua IDM về phải đổi đuôi lại nó mới nhận,bác cho hỏi mình flash lại FW này là giống như lúc mình mới mua máy phải k? có phải cài thêm phần mềm gì vào nữa k?tai e đọc loáng thoáng thấy có bài bảo mình như mất cái QT hay gì gì đó,vì vậy sợ chưa dám flash lại
 
Chỉnh sửa cuối:
e khắc phục đc rồi, do down FW bằng navifirm qua IDM về phải đổi đuôi lại nó mới nhận,bác cho hỏi mình flash lại FW này là giống như lúc mình mới mua máy phải k? có phải cài thêm phần mềm gì vào nữa k?tai e đọc loáng thoáng thấy có bài bảo mình như mất cái QT hay gì gì đó,vì vậy sợ chưa dám flash lại

Nếu là fw gốc của Nokia thì nó sẽ là mặc định mới toanh, sau khi sử dụng thiếu gì cài nấy có đủ cả không sợ gì đâu bạn, cứ up lên vr mới nhất đi.
 
Nếu là fw gốc của Nokia thì nó sẽ là mặc định mới toanh, sau khi sử dụng thiếu gì cài nấy có đủ cả không sợ gì đâu bạn, cứ up lên vr mới nhất đi.
FW down bằng navifirm có phải FW chuẩn của nó k bác? chuẩn thì e up lại để đi đổi cái máy,pin dùng đc có 1 ngày mà k bít bị làm sao
 
FW down bằng navifirm có phải FW chuẩn của nó k bác? chuẩn thì e up lại để đi đổi cái máy,pin dùng đc có 1 ngày mà k bít bị làm sao

Chuẩn của Nokia đấy bạn, muốn chuẩn của máy khi mua thì xem FW trên máy là bao nhiêu thì tải về và Flash lại.
 
Mình có 1 lỗi khi Flash là cứ load đến 60% là dừng lại và báo lỗi.Máy vẫn khởi động lên đc nhưng chưa hoàn chỉnh,bạn nào biết lỗi này giúp mình với
 
Chủ thớt ơi ! Mình cài đặt soft này rùi nhưng sao tạo thư mục RM trong product không được vậy . Hic hic
 
trước h mình toàn flash bằng JAF thôi. nên bằng phoenix ko biết. Có bạn nào nói kĩ kĩ chút cho mình cách flash bằng phoenix với
Thanks all ^^
 
Phoenix Service Software 2011.46.007.47652 Cracked (02-02-2012)

Phoenix Service Software 2011.46.007.47652 Cracked


Mã:
 1. CHANGE HISTORY
 Version 1: 31.01.2012 Initial version

 2. INTRODUCTION
 New version of Phoenix service software is available. This multi-protocol service software supports Nokia CDMA, GSM, TDMA, and WCDMA products.


 Main component versions in the release:
 * DK2 Driver Version 07.14.0.25
 * Nokia Connectivity Cable USB Driver Version 2011.48
 * Flash Update Package 2011.40.000
 * FLS-x Drivers Version 2.09.28
 * FUSE Connection Manager v 2011.43.1


 3. MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.38.3.46817


 Error Corrections & changes:
 * Ambient light sensor enabled

 Please note:

 Energy Management Calibration should not be performed for products using the "Quantum" engine (RM-689, RM-702, RM-704 and other product using the same engine)


 * Microsoft DOT.NET version 2 Service Pack 2 is now the minimum requirement. Phoenix installation will check PC for the DOT.NET version and update it automatically when PC has online connection. Without online connection, old DOT.NET versions must be updated manually.
 * New common data package location in use. Please see document SR1315 in KICS Information Center for further information.
 * All Nokia Service Software Applications will use following location for product specific data:
 - Windows XP: C:\Documents and Settings\All Users\Application Data\Nokia\Packages
 - Windows 7: C:\Program Data\Nokia\Packages
 * Please see articles SR1774 and 1786 for more information on the use of Nokia Data Package manager - tool, and article SR1854 for more information on the Nokia Service Application Manager Tool.
 * During installation, Data Packages should be installed in these directories, if they install to any other location by default. target folder for local data packages can be changed in the installation wizard manually
 * This version contains the latest Tucson components. Therefore it is not necessary to use Tucson Add-On Installation Packages
 * Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC) should be turned off from Windows Control Panel settings.
 * For more information concerning new options in "Firmware Update" - menu and their use, Please see documents SR1313 and SR1659 in KICS Information Center.
 * Tucson operations combined with "flash" - option are now handled in the same way as "refurbishment", which requires Mass Memory Content File to be available. 
 * Use of Flash option simultaneously with product code change for USB Only phones is restricted. It is recommended to flash phone separately with Firmware Update. Please refer to product specific instructions.
 * Connection media to FLS-5 must be configured to be "USB_FBUS", after FLS-4 support has been removed FBUS does not work anymore with FLS-5

 4. KNOWN ERRORS & LIMITATIONS
 * FLS-5 drivers do not support 64 bit OS, so phones using FLS-5 /USB_FBUS connection can not be serviced in 64 bit operating systems
 * Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
 * Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore. FLS-5 can be used with other product specific cables and adapters, but not with SS-46 Interface Adapter.
 * If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is “C:\Program Files\Common Files\Nokia\Tss\Flash”. If not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
 * Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available.
 * FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version 11 has been released to correct this. Sales pack code is 0089J83 , old HW version is not delivered anymore
 * Please refer to product specific documents and instructions concerning the limitations of the RX-51 product
 * RX-51 flashing does not work when CU-4 is used
 * RX-51 Product Code changes work only without FLASH option, please flash phone separately
 * When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the first time. Please wait patiently; Phoenix will start after configuration is finished.
 * When using Data Package download functions with online connection, download times may occasionally be long. This is not caused by Phoenix (or Care Suite). The download speed from online servers is occasionally is known to be slow, depending on how data is buffered on caching servers.
 * After you close Phoenix, it may not restart. To rectify this:
 - Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or optionally restart your PC
 * It is not possible to program Mass Media Content file to some devices over direct USB cable connection, due to the large size of the file. For these models a feature called “Media Check” has been implemented. When this type of product is connected to service software / PC via direct USB cable the refurbishment option will be disabled. Please use a flash prommer. Affected products using Media Check are: RM-122, RM-175, RM-176, RM-186, RM-246, RM-247, RM-296, RM-297, RM-320, RM-462, RM-472, RM-484, RM-505, RM-555, RM-559
 * To be able to use the help files in Windows 7 you need to install Windows Help program (WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:
 - Start Phoenix with online connection to Internet, select "Help" and "Phoenix help". Click the "Microsoft Help and Support" website link. Download WinHlp32 and install it.- Go to Microsoft Corporation: Software, Smartphones, Online, Games, Cloud Computing, IT Business Technology, Downloads. Type "WinHlp32" to "Search Microsoft.com" - field. Locate Windows Help program (WinHlp32.exe) for Windows 7 and install it
 * When using flash prommers, only one connection type to one prommer is allowed. Please use either NFPD USB or NFPD TCPIP connection to one prommer, not both connections to same prommer

 5. INSTALLATION
 * If you have Phoenix External 2007.4.6.170 or older you must uninstall it before installing this release.
 * Download Phoenix_Service_Software_2011_46_7_47652.exe application file to your computer (e.g. C:\TEMP).
 * Close all other programs.
 * Disconnect all flash prommers and phones which may be connected to PC via USB connection (reconnect them only after Phoenix installation has been completed)
 * Run Phoenix_Service_Software_2011_46_7_47652.exe and follow instructions on the screen to install Phoenix Service Software
 * If your PC does not have Microsoft DOT.NET version 2 Service Pack 2 or newer, and PC is not connected to internet you must update DOT.NET manually to the required version. When PC has online connection, DOT.NET will be updated automatically.
 * Connect a dongle (PK-1, PKD-1, FLS-4S, FLS-5) when message appears on the screen
 * If you are prompted to update any existing driver or file versions, select “yes”.
 * Depending on the operating system, the PC may require rebooting.
 * Allow Windows to register the Phoenix components.
 * Open Phoenix, use FUSE Connection Manager to configure connections depending on the tools you use
 * If you use CU-4, please pair the connection with service adapter by selecting “pair with service adapter” - option
 * Update your prommer with the latest software included in this installation package.
 * Install and use the latest available product specific data packages or flash bundles

 6. Supported operating systems and user rights
 * Windows XP Service Pack 1 or higher
 * When installing Phoenix into Win XP you must have local admin rights.
 * When using in Win XP, user must have power user rights.
 * Windows 7 32 Bit version
 * Windows 7 64 Bit version (Please note that FLS-5 drivers do not support Win 7 64 bit OS, therefore FLS-5 can not be used in this operating system)

 7. HW & Tool requirements:
 * Please refer to Documents SR998 and SR999 in KICS Information Center.
 * For information on product specific data packages, tools and instructions please refer to service manuals and technical bulletins.
 * If you are installing this version of Phoenix on a new Imaged PC, and you are using an FLS-4S or FLS-5 during the install, then install the FLS-X drivers first.
 * Separate installation package for FLS-5 drivers can be found attached to this document together with Phoenix installation package

 8. Reporting errors & ZIP Package Generator
 * You can use the ZIP Package Generate tool to create a ZIP package with necessary files to report an error.
 * Launch Phoenix
 * From main menu select Help -> Troubleshooting. The Zip Package Generator will be opened.
 * In hours define period from which log files will be gathered in the ZIP package.
 * Press Create ZIP - button and wait a while. When ZIP package is generated the content is displayed:
 * Press Show Zip Folder- button to open Explorer window with folder containing the generated ZIP package:
 * The generated ZIP package named like "Environment_20110223025156.ZIP" is highlighted by default. The ZIP packages should be removed manually when they are not needed any more.
 * Attach the generated ZIP package to the Genius Case.
 * Brief step by step description about how the error can be reproduced should be attached to the Genius Case.
 * Please also attach screenshot of error to the Genius Case.
 * If Phoenix may create a file named "PhoenixMiniDump.dmp". If you are prompted that this file has been created, please browse to the folder shown on UI and attach the dump - file to your Genius case as well.

 For more information on the log files, please see document SR2169 "Log Files and Error Reporting in Nokia Service Software " in KICS Information Center

 9. NOTES
 * This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (OpenSSL: The Open Source toolkit for SSL/TLS).
 * Copyright (c) 1998-2005 The OpenSSL Project. All rights reserved.
 * Copyright (c) 1995-1998 Eric Young (eay@cryptsoft.com). All rights reserved.
 * OpenSSL license text can be found from OpenSSL: Source, License.



anhso-195601_Phoenix.gif

anhso-195605_TrieuNhan.gif


[download]http://www.mediafire.com/?cp6b6d8sxzm2w96[/download]


[download]http://mir.cr/1WTPFD1Y[/download]
 
Mình down Phoenix Service Software 2011.46.007.47652 Cracked này đây, cài đặt xong vào win 7 32 bit, mở ra chạy thì nó load Phoenix Service Software hết rùi báo lỗi thiếu cái file gì đó, ấn ok hay cancel thì nó cũng cứ load lại mà xong lại báo lỗi, cứ thế thôi, ko thoát ra dc mà cũng ko mở ra Phoenix dc. Khi nó load ấn cancel, nó cũng ko ngừng, cứ load rồi báo lỗi lặp đi lặp lại ko close dc. Mình đã gỡ bỏ Phoenix và cài lại mà vẫn bị thế, ko dùng dc. Tức mình khi nó load mình ấn cancel lia lịa vài chục lần thì nó lại vào dc Phoenix. Vào dc mà mình chưa dám up fw, sợ đang up Phoenix lại lỗi, deadphone thì lấy gì mà cứu.
Xin hỏi các bạn cài đặt Phoenux xong chay có bị load Phoenix Service Software hết rùi báo lỗi mãi ko? Làm sao để ko bị thế nữa?
 
Mình down Phoenix Service Software 2011.46.007.47652 Cracked này đây, cài đặt xong vào win 7 32 bit, mở ra chạy thì nó load Phoenix Service Software hết rùi báo lỗi thiếu cái file gì đó, ấn ok hay cancel thì nó cũng cứ load lại mà xong lại báo lỗi, cứ thế thôi, ko thoát ra dc mà cũng ko mở ra Phoenix dc. Khi nó load ấn cancel, nó cũng ko ngừng, cứ load rồi báo lỗi lặp đi lặp lại ko close dc. Mình đã gỡ bỏ Phoenix và cài lại mà vẫn bị thế, ko dùng dc. Tức mình khi nó load mình ấn cancel lia lịa vài chục lần thì nó lại vào dc Phoenix. Vào dc mà mình chưa dám up fw, sợ đang up Phoenix lại lỗi, deadphone thì lấy gì mà cứu.
Xin hỏi các bạn cài đặt Phoenux xong chay có bị load Phoenix Service Software hết rùi báo lỗi mãi ko? Làm sao để ko bị thế nữa?

Bạn chụp cái hình đưa lên xem nó bị làm sao, k thì nó lỗi gì vào google tra tiếp chứ nói thế này khó bắt bệnh lắm.
 
Đây, sau khi load Phoenix Service Software thì nó ra cái bảng có chữ ok/ cancel. Ấn ok thì nó ra bảng the path…, như bị thiếu file gì đó. ấn ok tiếp thì lại về Phoenix Service Software có chữ ok/ cancel.
như ảnh http://i142.photobucket.com/albums/r94/lunar77/ok.jpg
Nếu ấn cancel thì ra bảng error 1706… ok thì nó lặp lại load Phoenix Service Software rồi lại thế.
như ảnh http://i142.photobucket.com/albums/r94/lunar77/cc.jpg
Các bạn xem giùm hộ, mình tìm trên google error 1706 của Phoenix mà chả thấy. Ko biết làm sao nữa.
Các bạn mở Phoenix có bị load Phoenix Service Software ko?
 
Có ai xem dùm mình chưa mà ko thấy trả lời vậy?
Mình nghe nói có thể up fw offline bằng NSU, bằng cách cho bộ fw vào đường dẫn như với phoenix có đúng ko các bạn? Mình thắc mắc sao với 2 soft khác nhau mà lại cho vào chung 1 đường dẫn của Phoenix, như vậy sao NSU nhận ra?
Phoenix bị lỗi vậy chỉ còn dùng NSU thôi, ai chỉ rõ cho mình cách up fw offline bằng soft này dc ko?
http://www.vn-zoom.com/f280/nokia-software-updater-3-0-nang-cap-firmware-nokia-de-hon-637318.html
Up offline bằng NSU trên laptop cắm pin thì đảm bảo ko deadphone chứ? Mong các bạn chỉ dùm sớm! Thanks
 
Có ai xem dùm mình chưa mà ko thấy trả lời vậy?
Mình nghe nói có thể up fw offline bằng NSU, bằng cách cho bộ fw vào đường dẫn như với phoenix có đúng ko các bạn? Mình thắc mắc sao với 2 soft khác nhau mà lại cho vào chung 1 đường dẫn của Phoenix, như vậy sao NSU nhận ra?
Phoenix bị lỗi vậy chỉ còn dùng NSU thôi, ai chỉ rõ cho mình cách up fw offline bằng soft này dc ko?
http://www.vn-zoom.com/f280/nokia-software-updater-3-0-nang-cap-firmware-nokia-de-hon-637318.html
Up offline bằng NSU trên laptop cắm pin thì đảm bảo ko deadphone chứ? Mong các bạn chỉ dùm sớm! Thanks
Mình muốn biết rõ về Up fw offline bằng NSU, ko khó với ng hay up fw, mà sao ko ai trả lời vậy??
 
mình muốn làm 1 firmware hack vĩnh viễn cho N500 Belle dùng Phoenix.mình ấn nút Refu... để Flash thì nó hiện lên cái thông báo là

" Getting list of files to br flashed failed: 0x84210010(-2078212080) -Firmware: Flashing file 'c:\progam file\nokia\phoenix\products\RM-750\RM-750_M019.010.emmc.fptx' is not found. "

ai biết chỉ dùm mình với !
 
Phoenix Service Software 2012.04.003.47798 Cracked [Update 16-02-2012]

cf0e465bdc83ec811846f75a2f32f887_41042143.icon16.gif
Phoenix Service Software 2012.04.003.47798 Cracked


Mã:
[B]Main component versions in the release:
Product API 2012.2.2
 Nokia Connectivity Cable USB Driver Version 7.1.69.0
 Flash Update Package 2011.50
 FUSE Connection Manager v 2011.51
MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.46.7.47652

 Error Corrections & changes:
New products: RM-852, RM-838, RM-843, RM-844, RM-787, RM-788, RM-789
Please note:
 Energy Management Calibration should not be performed for products using the ?Quantum? engine (RM-689, RM-702, RM-704 and other product using the same engine)

 Supported operating systems and user rights
Windows XP Service Pack 1 or higher
 When installing Phoenix into Win XP you must have local admin rights.
 When using in Win XP, user must have power user rights.
 Windows 7 32 Bit version
 Windows 7 64 Bit version (Please note that FLS-5 drivers do not support
Win 7 64 bit OS, therefore FLS-5 can not be used in this operating system[/B]



9033347b86b37690e61d4ceb30ea0286_41192248.02222012114917.jpg


[download]http://mir.cr/ML97T4JF[/download]
 
Back
Top